Download Driver Usb Samsung G531h

• Download Usb Driver Samsung Grand Prime G531h
• Download Driver Usb 2.0
• Samsung Galaxy Grand Prime Usb Driver For Windows 10

Are you looking for the stock ROM firmware of your device Samsung Galaxy Grand Prime 4G SM-G531F? If yes your answer, you are in the right page. We have given the direct link to download Samsung Galaxy Grand Prime 4G SM-G531F firmware.Download Samsung Galaxy Grand Prime 4G SM-G531F Firmware from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the Firmware file.Download Samsung Galaxy Grand Prime 4G SM-G531F FirmwareStock ROM File Name: G531FDDU1AOJ1G531FODD1AOJ2INS.zipStock ROM File Size: 771 MBAndroid OS Version: 5.1.1. How To Flash Stock ROM Firmware On Samsung Galaxy Grand Prime 4G SM-G531FStep 1: To get started, and install it in your computer. Once done, download the stock firmware of your device and extract the zip file to get the “.tar.md5” file as shown below.Step 2: Next, switch off your smartphone.

Download Samsung Galaxy Grand Prime VE G531H USB Driver and connect your device successfully to Windows PC. On this page, Android ADB Driver provides official Samsung Galaxy Grand Prime VE G531H USB Drivers, ADB Driver and Fastboot Driver. Feb 10, 2015  SAMSUNGUSBDriverforMobilePhones.zip (15.3MB) The USB Driver for Windows is available for download in this page. You need the driver only if you are developing on Windows and want to connect a Samsung android device to your development environment over USB.

Once done, boot it into the “ Download” mode by pressing and holding the Volume Down, Power and Home buttons simultaneously. Now your Samsung device will vibrate.

Download Usb Driver Samsung Grand Prime G531h

Once you have felt it, keep pressing the Volume Down and Home buttons (leave the Power button) and your device will boot into the Download mode.Step 3: Now you will see a “ Warning” message as shown below. Just press the “ Volume Up” key to continue.Step 4: Next, and extract it to a folder in your computer.

Download Driver Usb 2.0

Samsung Galaxy Grand Prime Usb Driver For Windows 10

Once done, click on “ Odin3.exe” to launch its window. Step 5: Now connect your smartphone to the computer using the original USB data cable. If you have installed the USB drivers of your device properly in the Windows computer, Odin will automatically identify your device and will show a “ Added” message in the “ Log” section.Step 6: Next, click on the “ AP” button and select the “.tar.md5” file (from Step 1).Step 7: Once the Samsung firmware file is added, click on “ Start” button in “ Odin” to launch the flashing process.Step 8: Don’t do anything during the flashing process. Once it gets completed, you will see the green “ PASS” message as shown in the screenshot below.Step 9: Now unplug your device from the computer. But when you try to boot your device normally, it will get into a boot loop. To fix this error, switch off your smartphone and boot into the “ Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously.Step 10: Once your device boots into the recovery mode, click on “ Wipe data/factory reset“. Once done, click on “ Reboot System Now” as shown in the screenshot below.